Returning the Server to Operation
These topics describe how to return the server to operation.
Step Description Links
1. Replace the top cover and return the server to its
normal operating position
“Replace the Top Cover” on page 169
“Return the Server to the Normal Operating
Position” on page 170
2. Connect the power cords to the server. “Attach Power Cords” on page 172
3. Power on the server. “Power On the Server (Oracle
ILOM)” on page 172
“Power On the Server (Power
Button)” on page 173
Replace the Top Cover
1.
Place the top cover on the chassis (panel 1).
A metal air baffle is attached to the rear inside surface of the top cover. When you place the top
cover on the server, ensure that the air baffle does not catch on anything inside the server.
Set the cover down so that it is about 1 inch (2.5 cm) forward of the rear of the server.
2.
Slide the top cover toward the rear of the chassis until the rear cover lip engages
with the rear of the chassis.
Returning the Server to Operation 169
To Next Page
Loading...
Need help?
General