Oracle SPARC T5-2 - Page 47

Check for Faults
1.
Log in to Oracle ILOM.
See “Log In to Oracle ILOM (Service)” on page 35.
2.
Check for PSH-diagnosed faults.
This example shows how to check for faults through the Oracle ILOM fault management shell.
-> start /SP/faultmgmt/shell
Are you sure you want to start /SP/faultmgmt/shell (y/n)? y

faultmgmtsp> fmadm faulty
------------------- ------------------------------------ -------------- -------
Time UUID msgid Severity
------------------- ------------------------------------ -------------- -------
2012-08-27/19:46:26 4ec16c8d-5cdb-c6ca-c949-e24d3637ef27 PCIEX-8000-8R Major

Problem Status : solved
Diag Engine : [unknown]
System
Manufacturer : Oracle Corporation
Name : SPARC T5-8
Part_Number : 12345678+11+1
Serial_Number : 1238BDC0DF

----------------------------------------
Suspect 1 of 1
Fault class : fault.io.pciex.device-interr-corr
Certainty : 100%
Affects : hc:///chassis=0/motherboard=0/cpuboard=0/chip=0/hostbridge=0/
pciexrc=0
Status : faulted but still in service
FRU
Status : faulty
Location : /SYS/PM0
Manufacturer : Oracle Corporation
Name : TLA,PN,NRM,T5 1.2
Part_Number : 7061001
Revision : 01
Serial_Number : 465769T+12445102WR
Chassis
Manufacturer : Oracle Corporation
Name : SPARC T5-8
Part_Number : 12345678+13+2
Serial_Number : 1248DC140

Description : A fault has been diagnosed by the Host Operation System.

Detecting and Managing Faults 47