EasyManua.ls Logo

Oval ALTI mass CA00A - CSA Explosionproof

Oval ALTI mass CA00A
162 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
L
--
740
--
28
--
E
10
10.4.4 CSA explosionproof
Converter 70007590
Detector 70011628
Applicable standard:
  Detector
CAN/CSA Standard C22.2 No. 0-10
CAN/CSA-C22.2 No.61010-1-12 (3rd Edition)
UL Std. No. 61010-1 (3rd Edition)
CAN/CSA Standard C22.2No. 60079-0:11
ANSI/UL 60079-0 (2009)
CAN/CSA-C22.2 No.60079-11:11
IEC 60079-11 Edition 6
UL ND 60079-11(Ed. 6)
  Transmitter
CAN/CSA Standard C22.2 No. 0-10
CAN/CSA-C22.2 No. 61010-1-12 (3rd Edition)
UL Std. No. 61010-1 (3rd Edition)
CAN/CSA Standard C22.2 No. 60079-0:11 December 2011
CAN/CSA Standard C22.2 No. 60079-1:11 December 2011
CAN/CSA-C22.2 No. 60079-11:11 December 2011
ANSI/UL 60079-0 (2009) Fifth Edition
ANSI/UL 60079-1 (2009) Sixth Edition
ANSI/UL 60079-11 (2013) Sixth Edition
Integral type
Converter symbol: Class, Zone 1, Ex d ib C T4 Gb
Class, Zone 1, AEx d ib C T4 Gb
(CA, CB, CS series integral type)
Detector symbol: Class, Zone 1, Ex ib C T4 Gb
Class, Zone 1, AEx ib C T4 Gb
Ambient temp.: -40 to +55 (-20 to +55 when connected with CS080 and CB040/050)
Detector to be connected
: CA006 to CA250
CB006 to CB050
CS010 to CS080
Field temp.: As shown on Detector Model Specification Table 2
Power source: AC85 to 250V 50/60Hz, or DC20 to 30V
Allowable voltage: Um=250V
Communication: HART, Modbus PROFIBUS and FOUNDATION Fieldbus (FISCO)
Separate type
Transmitter symbol: Class, Zone 1, Ex d [ib] C T6 Gb
   Class, Zone 1, AEx d [ib] C T6 Gb
Detector symbol: CA series: Class, Zone 1, Ex ib C T1, T2, T3, T4, T5 Gb
Class, Zone 1, AEx ib C T1, T2, T3, T4, T5 Gb
CB series: Class, Zone 1, Ex ib B T3, T4 Gb
Class, Zone 1, AEx ib B T3, T4 Gb
CS series: Class, Zone 1, Ex ib C T3, T4 Gb
Class, Zone 1, AEx ib C T3, T4 Gb
Converter Ambient Temp
.: -40 to +55
Detector Ambient Temp.: As shown on Detector Model Specification Table 2
Fluid Temp.: As shown on Detector Model Specification Table 2
Power source: AC85 to 250V 50/60Hz, or DC20 to 30V
Allowable voltage: Um=250V
Communication: HART, Modbus PROFIBUS and FOUNDATION Fieldbus (FISCO)

Table of Contents

Related product manuals