Configuration
16 Programming Guide
Parameter Tel. Type
Description/Function Notes
• Some telephones in the above list are not available
depending on the destination area.
• Some features of a KX-T7400/T7500 series PT do not
function unless it is connected to a DLC or DHLC card
whose LPR Version (ROM Version) is 1 or later.
Reference • 1.3 System Features (F/G)
– Mixed Station Capabilities
Parameter DN
Default 1001 –
Value Range 3-4 digits consisting of 0-9
Description/Function Specifies the DN (Directory Number = extension number) for the
extension port.
Note
• You must assign the paired extension for DN after selecting
DSS for the attribute.
Reference • 2.3 Numbering Plan (P/G)
Parameter Group No.
Default 1
Value Range 1-128
Description/Function Specifies the Extension Group (1-128) to which the extension port
is assigned.
Note
• Group No. of the first extension is assigned to #128.
Reference • 1.3 System Features (F/G)
– Extension Group
• 3.3 Extension Group (P/G)
To Next Page
Loading...
