Panasonic KX-TD500 - Page 17

Configuration
Programming Guide 17
Parameter Parallel / XDP (DHLC card)
Default Parallel
Value Range 1. Parallel
2. XDP
Description/Function Specifies whether to enable or disable "Parallelled Connection of
PT and SLT" or "XDP (eXtra Device Port) Connection of DPT and
SLT."
Reference • 1.1 System Expansion (F/G)
– EXtra Device Port (XDP)
• 1.3 System Features (F/G)
– Parallelled Telephone
Parameter Parallel / XDP (HLC card)
Default None
Value Range
1. None
2. Parallel
Description/Function Specifies whether to enable or disable "Parallelled Connection of
PT and SLT."
Reference • 1.3 System Features (F/G)
– Parallelled Telephone
Parameter Status
Default —
Value Range
1.
INS
2. OUS
3. FAULT
Description/Function Specifies the operating status of the extension port.
1. INS: The extension port is In-Service
2. OUS: The extension port is Out-of-Service.
3. FAULT: The extension port is defective.
Reference None