Panasonic KX-TD500 - Page 37

Configuration
Programming Guide 37
Parameter Group No.
Default 1
Value Range 1-48 or 1-128
Description/Function Type: CO, Qsig-Master, Qsig-Slave
Specifies the Trunk Group (1-48) to which the PRI port is assigned.
Type: EXT
Specifies the Extension Group (1-128) to which the PRI port is
assigned.
Reference • 1.3 System Features (F/G)
– Extension Group
– Trunk Group
• 3.1 TIE Line Features (F/G)
– TIE Line Service
• 3.2 Trunk Group (P/G)
• 3.3 Extension Group (P/G)
Parameter Status
Default —
Value Range
1. INS
2. OUS
3. FAULT
Description/Function Specifies the operating status of the PRI port.
1. INS: The PRI port is In-Service.
2. OUS: The PRI port is Out-of-Service.
3. FAULT: The PRI port is defective (hardware).
In this case, the LED indicator on the PRI23/PRI30 card will
light.
Reference None