Panasonic KX-UTG200

• 5.4.7 Management Server Settings (Page 260)
• 5.4.8 SNMP Settings (Page 265)
• 5.5.12 VLAN Settings (Page 286)
• 5.5.9 STUN Settings
→ STUN_REFRESH_INTVL (Page 283)
• 5.6.1 Call Control Settings
→ ENDCALL_TRANSFER_ENABLE (Page 291)
→ FOLLOW_SERVER_BELLCORE (Page 291)
→ BUSY_ON_CALL_END (Page 291)
→ REORDER_TONE_TIM (Page 291)
• 5.6.2 Telephone Settings
→ NO_OPERATION_TIMER (Page 294)
→ URL_DIALING_ENABLE (Page 294)
→ SCREEN_SAVE_TIMER (Page 295)
→ RECORDING_ENABLE (Page 295)
→ CID_DATA_PRIORITY_ENABLE (Page 295)
• 5.6.3 Instant Message & Presence (Page 297)
• 5.6.9 Flexible Button Settings
→ FLEX_BUTTON_LINE (Page 312)
• 5.6.10 KEM1 (KX-UTA336 Add-on Key Module 1) Button Settings
→ KEM1_BUTTON_FACILITY_LABEL (Page 313)
→ KEM1_BUTTON_FACILITY_LINE (Page 313)
• 5.6.11 KEM2 (KX-UTA336 Add-on Key Module 2) Button Settings
→ KEM2_BUTTON_FACILITY_LABEL (Page 314)
→ KEM2_BUTTON_FACILITY_LINE (Page 314)
• 5.9.2 Per Line - Call Control Settings
→ MOH_SERVER_URI (Page 337)
→ FWD_NO_ANSWER_TIMEOUT (Page 333)
→ XFER_WHEN_END_LOCAL_CONF (Page 337)
→ XFER_WHEN_END_LOCAL_CONF (Page 337)
• 5.9.3 Per Line - SIP Settings
→ SIP_2NDPROXY_ADDR (Page 353)
→ SIP_2NDPROXY_PORT (Page 353)
→ SIP_2NDRGSTR_ADDR (Page 353)
→ SIP_2NDRGSTR_PORT (Page 353)
Changed Contents
• 4.5.2.1 RTP Settings
Document Version 2015-01 Administrator Guide 393
8.1.1 12.1.1 Software File Version 02.110