Pentax R-2500NS Series - ACCESSING POWERTOPOLITE; 2.1 How to access PowerTopoLite

11
2. ACCESSING POWERTOPOLITE
2.1 How to access PowerTopoLite
To access the R-2500NS Special Functions of the PowerTopoLite, perform the following
procedures.
Press the [POWER] (ON/OFF) key to view the R-2500NS start-up screen.
It turns to ELECTRONIC VIAL screen after a while.
※R-2501NS、R-2502NS only
Press the [ESC], [Laser] or [ENT] to view MODE A
screen.
Press the [F5][MODE] to view MODE B screen.
Press [F1][S.FUNC] to view Functions of
PowerTopoLite screen.
Press [F5][PAGE] to view another Function
combination of PowerTopoLite screen.