63
Select 1.COGO and press [ENT] to view the COGO
screen.
Select the 1. INVERSE and press [ENT] to view
INVERSE screen.
A. Start point input
(Input the PN, Coordinates and PC of the Start
point.)
Select 1. SP and press [ENT] to view SP screen.
• [LIST] key
All stored points can be displayed as follows by
pressing [F2][LIST].
Press [F2][LIST] to view POINT SELECTION
FROM THE LIST screen.
Press [ENT] to open the SP input screen.
Input your desired point name by pressing keys,
and press [ENT] to open the X coordinate input
screen.
Input your desired value by pressing each keys
and press [ENT] to go Y coordinate.
To Next Page
Loading...
