60
7.5 Setting Out Point
Select 5. SETTING OUT POINT and press [ENT] to
view STATION POINT SETUP screen.
Open the PN, X, Y, Z, IH and PC input window
and input each. Save the data by pressing
[F1][SAVE].
Press [ENT] to view STATION POINT H.ANGLE SETUP screen.
Input the H. angle by pressing [F2][INPUT],
[F3][0SET] and [F4] [HOLD] or Backsight
Coordinates by pressing [F5][BSP].
It's chosen whether it's input whether a
coordinate of Point A is measured.
To Next Page
Loading...
