Pentax R-2500NS Series - Rem; General Pictures of Measurement

92
8.4 REM
8.4.1 General pictures of measurement
With REM measurement, a prism (Reference point) is set approximately directly below
the place to be measured, and by measuring the prism, the height to the target object
can be measured. This makes it easy to determine the heights of electric power lines,
bridge suspension cables, and other large items used in construction.
From the PowerTopoLite screen, press [F2][CALC]
to view the CALCULATION screen.
Select 4. REM and press [ENT] to view MEASURE
screen.
Please press [ENT] after measuring distance.
General pictures
Horizontal distance
Height
Prism height
Prism