70
Press [ENT] to view the following screen.
The PN, X, Y, Z and PC are viewed and can be edited.
If all items are OK, press [F1][SAVE] or [F5][ACCEPT] to save them.
8.1.3 Circle Radius
The center point and radius of the circle drawn by three points are calculated by this
function. You can store calculated center point.
Input: 3 points
Output: Center point of the arc
Radius of the arc
From the PowerTopoLite screen, press [F2][CALC]
to view the CALCULATION screen.
Select 1.COGO and press [ENT] to view the COGO
screen.
To Next Page
Loading...
