Pentax R-2500NS Series User Manual

59
After you finish sighting the reference point, press
[ENT] to go to next screen.
Input coordinates of the center point and radius
to make a circle.
After you finish with input, press [ENT] to display
the measurement screen.
Sight the target, Press [F1][MEAS] to measure the
distance. From the measurement results, the distance
from the target to the circumference will be
displayed.

Pentax R-2500NS Series Specifications

General

Brand	Pentax
Model	R-2500NS Series
Category	Measuring Instruments
Language	English