Pentax R-2500NS Series - Page 65

64
Press [ENT] to open the Y coordinate input
screen and input.
Press [ENT] to open the Z coordinate input screen
and input.
Press [ENT] to open the PC input screen and
input.
B. End point coordinates input
(Input the PN , Coordinates and PC of the End
point.)
After PC input, EP screen is viewed.
Input the PN, X, Y, Z Coordinates and PC name
of the End point.
Press [ENT] to view the RESULT OF INVERSE
screen.
C. Another End point Coordinates input
Input the PN, X, Y, Z Coordinates and PC name
of another End point, and another inverse result
can be performed.