22
• [OTHER] Key
To select the job file to be listed
Press [5][OTHER] to display JOB LIST
SEARCH screen, then select the job file.
• [FIND PN] Key
To search PN from key word
Press [2][FIND PN] to display PN input screen,
then input key word.
For instance, if you need to search point including “P1” in PN, input “*P1” in the key
word, then press [ENT].
Select the point from the list
Press [ENT] to display the point that matches the
key word.
• [ ] / [ ] Key
To switch the point to be displayed
When the point you want is displayed,
press [ENT] to finalize input.
To Next Page
Loading...
Need help?
General
