36
Press [F2][OFFSET] to display OFFSET screen.
For more details on input procedure, refer to
“4.8 Offset”
NOTE: When pressing [F2][OFFSET] on
MEASURE screen, besides RO, DO, VO and TO
can be input.
Station point setup can be changed by pressing
[F3][STATION].
EDM settings can be selected by pressing
[F1][EDM].
For example, change 1.PRIM. MEAS KEY (MEAS)
to TRACK SHOT or TRACK CONT if you want to
use tracking measurement with PRIM MEAS KEY
(MEAS).
The target type can be selected by pressing [F2][TARGET].
Coordinates display and Angle & Distance display
1) Press [F5][PAGE] twice.
2) Press [F3][ANG & DIST] to view [F3][COORD.] and Angle and Distance values.
3) Press [F3][COORD.] to view [F3][ANG&DIST] and Coordinates.
Function of ANG.&DIST screen
Pressing [F4][DISP] changes the distance data to be
displayed
To Next Page
Loading...
Need help?
General
