67
Press [ENT] to open the PN input screen.
Input your desired point name by pressing keys and
press [ENT] to view X screen.
Press [ENT] to open the X coordinate input screen.
Input your desired value by pressing keys and press
[ENT] to go Y coordinate.
Press [ENT] to open the Y coordinate input screen.
In the same manner, input your desired value by
pressing keys and press [ENT] to open the Z
coordinate input screen.
Input your desired value by pressing keys and press
[ENT] to open the PC, Point Code, input screen.
To Next Page
Loading...
Need help?
General
