Pentax R-2500NS Series User Manual

77
Select 1. C1 and press [ENT] to view C1 screen.
C1 (Center 1) point is center point of Arc 1.
Input PN (Point Name), X, Y, Z, and PC (Point Code) of C1 point or import from the
memory of rectangular coordinate as C1 by [F2][LIST].
If you finish the input of C1 value, press
[F5][ACCEPT].Then you go to R1 input screen.
Input the radius of Arc1 as R1 value. If you finish
the input of R1, press [F5][ACCEPT].
Then you go to C2 input screen.
C2 (Center 2) point is center point of Arc 2.
Input PN (Point Name), X, Y, Z, and PC (Point Code) of C2 point or import from the memory
of rectangular coordinate as C2 by [F2][LIST].
If you finish the input of C2 value, press
[F5][ACCEPT].Then you go to R2 input screen.
Input the radius of Arc 2 as R2 value. If you finish the input of R2, press [ENT].
Then you go to RESULT OF ARC-ARC INTERSECTION screen.
You can see the coordinates of one of intersection
point. You can switch to one more intersection point
by pressing [F3][ONE MORE].

Pentax R-2500NS Series Specifications

General

Brand	Pentax
Model	R-2500NS Series
Category	Measuring Instruments
Language	English