PAGE 1-31118824, VER. 00
1.1 “2.XX” AND BIPAP AVAPS AND S/T DESIGN CHANGES
This section provides images of the physical differences between the components that were used in BiPAP
AVAPS and BiPAP S/T devices that were originally manufactured and the devices that are marked with “2.XX”
on the serial number/model number label of the device. Also note that the components used in the “2.XX”
variation of the BiPAP AVAPS and BiPAP S/T devices are also used in the BiPAP autoSV Advanced.
“2.XX” BiPAP AVAPS and S/T Devices Components Original BiPAP AVAPS and S/T Device Components
“2.XX” device Blower
bottom portion is blue
Original design
Blower is all black
“2.XX” device Blower
Cap has two
protruding grooves
Protruding grooves
not present on
original design
To Next Page
Loading...
