Philips BiPAP AVAPS - 4.3.1 User Mode; Figure 4-3: Comfort Options Screen; Figure 4-4: User Setup Screens

PAGE 4-51118824, VER. 00
4.3.1 USER MODE
From the Home screen, highlight the “Comfort” option and press the UI Knob. The following Setup screen will
appear:
FIGURE 4-3: COMFORT OPTIONS SCREEN
From the Home screen, highlight the “Setup” option and press the UI Knob. The following Setup screen will
appear:
F
IGURE 4-4: USER SETUP SCREENS
NOTE
Bi-Flex Setting Flex pressure relief - This setting can be enabled or disabled in Provider Mode.
Ramp Start Ramp Start Pressure - This setting can be enabled or disabled in Provider Mode.
Rise Time Rise Time Setting - This setting can be enabled or disabled in Provider Mode.
Backlight Enable or disable the button LED backlight on the device.
hPa/cmH
2
O Select either hPa or cm H
2
O as the default unit of measure on the device.
Humidifier View and adjust the humidifier setting. This setting displays when a humidifier is attached.
Setup
=
Comfort
Back
Bi-Flex 2
Ramp start 4
Rise time 3
FLEX 2
4
3
Icon View
Text View
Setup
Back
Back light on
hPa/cmH
2
O cmH
2
O
Humidier 3
cmH
2
O
3
Icon View
Text View