Philips BiPAP AVAPS - 7.2.5 Replacing the Flip Lid Assembly; Figure 7-8: Flip Lid Assembly; 1. Remove the Humidifier Tank Assembly. Refer to Replacing the Water Chamber Assembly.; 2. Using a screwdriver or similar probing tool, push in on the latches that secure the Flip Lid Assembly to the Humidifier Top Housing. Refer to Figure 7-9.

PAGE 7-91118824, VER. 00
7.2.5 REPLACING THE FLIP LID ASSEMBLY
FIGURE 7-8: FLIP LID ASSEMBLY
TO REMOVE THE FLIP LID ASSEMBLY :
1. Remove the Humidifier Tank Assembly. Refer to Replacing the Water Chamber Assembly.
2. Using a screwdriver or similar probing tool, push in on the latches that secure the Flip Lid Assem-
bly to the Humidifier Top Housing. Refer to Figure 7-9.
FIGURE 7-9: FLIP LID ASSEMBLY REMOVAL
Included in Kit Tools Required
• Flip Lid Assembly
• Tank Top Seal
None