Philips BiPAP AVAPS - Figure 4-5: User Info Screens; 4.3.2 Provider Mode; Figure 4-6: Accessing Provider Mode

PAGE 4-6
1118824, VER. 00
From the Home screen, highlight the “Info” option and press the UI Knob. The following Setup screen will
appear:
F
IGURE 4-5: USER INFO SCREENS
4.3.2 PROVIDER MODE
When in Provider Mode, full access to all parameters is granted. To access Provider Mode, refer to Figure 4-6.
F
IGURE 4-6: ACCESSING PROVIDER MODE
Blower Hours Displays the total number of hours that the Blower has been on.
Machine Hours Displays the total number of hours that the Blower has been on.
NOTE
• The screen will only show four (4) lines at a time. As you rotate the UI Knob to toggle over
different options the screen will slide up and down accordingly.
• For additional information on User Mode, refer to the device’s User Manual.
Info
Back
Blower Hours 890.1
Machine Hours 902.0
890.1
902.0
Icon View
Text View
Therap y
In f o
Fle x
Setu p
To access Provider Mode,
1. With power applied to the
device, use the Control Wheel
and toggle to “Setup”.
2. Press down and hold
the Control Wheel and
Ramp Button for at least
five seconds.