8 Hardware Settings
102
exchanging, repairing, or adding devices on the network at a later time. The customer is
responsible for complying with common network configuration rules.
IP Address
If the IP Address is set to 0.0.0.0, all network parameters are dynamically requested from a BOOTP
server. Otherwise the manually entered address is used.
Subnet Mask
If the IP Address is set to 0.0.0.0, the configured value is ignored, but the Subnet Mask value is requested
from a BOOTP server. If an
IP Address is configured manually, the Subnet Mask must also be
configured manually.
Default Gateway
If the IP Address is set to 0.0.0.0, the configured value is ignored, but the Default Gateway address is
requested from a BOOTP server. If an
IP Address is configured manually, the Default Gateway must
also be configured manually.
To Next Page
Loading...
