4 Understanding Configuration Settings
16
Setting Item
The left most column in each table lists the individual configuration items. These items correspond to
the menu items in the relevant setup menu at the monitor.
Operation Mode
This column indicates in which operation mode the setting is available. Abbreviations used for the
operating modes in this guide are:
Factory Default
This section deals with the Factory Default settings for each configuration item.
Choice/Range
This lists the possible configurable choices or ranges for the settings.
Not Applicable
Whenever you see a statement in the setting tables starting with "not applicable" (as in Select Audio),
this can mean that the setting appears as a menu item in the related setup menu, but cannot be stored
in the monitor's configuration (if necessary, the exact reason is given in the context).
Understanding Configuration Implications
When you permanently change any element of the configuration, you must consider the effect of the
new configuration on both patient and application behavior. For additional information on the context
of the configuration settings, see your monitor's Instructions for Use. Always ensure that the monitor
users are aware of the configuration settings.
Documenting Monitor Configurations
If you change settings from their default, this document will no longer reflect your configuration.
If you change any of the Factory Default settings, you may want to generate a detailed report of the
changed monitor configuration using the IntelliVue Support Tool. Make sure you review the
description of this functionality in the Support Tool Instructions for Use before you interpret the
content of this report.
Color C Orange Red, Green, Yellow, Blue, Magenta, Cyan,
White, Pink, Orange, Light Green, Light Red
Setting Item Mode Factory Default Choice/Range
Abbreviation Comment
C Configuration Mode
M Monitoring Mode
S Service Mode
<blank> Fixed setting, visible but not operable
To Next Page
Loading...
