8
95
8Hardware Settings
This section lists all Hardware Settings. This settings are set once per monitor. Any changes you make
to the hardware settings configuration are automatically stored, there is no need to save them in an
extra step.
Most Hardware Settings:
• must be entered for each monitor individually, they are stored at the monitor, and cannot be
cloned using the IntelliVue Support Tool
• can be changed in Service Mode only
For detailed configuration implications on these settings, please refer to the Service Guide provided on
the Documentation DVD shipped with your monitor.
Configuring General Hardware Settings
Hardware Settings: Main Setup > Hardware
General Hardware Factory Default Settings
Setting Item Mode Factory Default Choice/Range
Standby Image > Display 1 S Boot Image Boot Image, Moving Image
Interfaces > Input Device
IF
S Keybd/Mouse Keybd/Mouse, Bar Code
Data Export 1 C, S Fix 115200 AutoSpeed, Fix 19200, Fix 115200
Keyboard S US US, Dansk, Deutsch, British, Espanol,
Belgian, Francais, Italiano, Korean (Hangul),
Nederlands, Norsk, Portugues, Svenska/
Suomi, US International, Magyar
To Next Page
Loading...
