4 Understanding Configuration Settings
19
Selecting the Settings Included in a Configuration Report
The Configuration Editor lets you:
• select which settings you want to include in the configuration report, and
• store your selection for future use.
To select the settings you want to include in the report:
1 Select View > Report Filter....This opens the Report Filter window.
2 In the configuration structure, click on the "+" symbol to navigate to the required setting. By
default all settings are included. This is indicated by a check mark .
3 Click on the check box next to a setting's name to remove the check mark, and to exclude the
setting.
4 Select OK.
For example, if you want to create a PDF file with a summary of all Measurement settings of an
Avalon fetal monitor's configuration, you would deselect all settings except the Measurement Settings:
To Next Page
Loading...
