Philips FM20 - Stored Trace Recording On Demand for Ongoing NST Trace Interpretation

6 Monitor Settings
81
Stored Trace Recording On Demand for Ongoing NST Trace Interpretation
To configure this use model, configure the following settings:
• If you want to print the trace during an ongoing NST trace interpretation, you can record the trace
at any time from the starting point of the timer.
Setting Item Mode
Main Setup > NST Report > Setup > Setup NST Report > Report Recording > Manual C, M
Main Setup > NST Report > Setup > Setup NST Report > Auto Trace Rec > No C
Main Setup > Fetal Recorder > NST Autostart > Off C
Main Setup > Fetal Recorder > NST Autostop > On C