104
FHR, DFHR Configuration
Implications
24
FHR, DFHR Factory Default Settings 23
Focus on Paper-Based Use Models 75
Focus on Paper-Saving Use Models 79
Frequency Band 100
G
Gain 26
General Hardware Factory Default
Settings
95
General Hardware Settings Configuration
Implications
96
Generating a Configuration Report 17
Global Settings 10, 85
Global Settings Configuration
Implications
85
Global Settings Factory Default Settings 85
Global SmartKeys 59
Global SmartKeys - Changing the Selection
and Sequence
59
Global SmartKeys Choices 60
Global SmartKeys Factory Defaults 59
Global Speed 58
Guideline 71
H
Hardware Settings 10, 95
High Limit, Low Limit 28, 34, 43
High Limit, Low Limit, Desat Limit 32
High Limit, Low Limit, High Delay, Low
Delay, SignalLoss Delay
24, 33
How Can I Get a Support Tool License
Key?
12
How to Read the Configuration Tables 15
HR (MECG) Configuration
Implications
28
HR (MECG) Factory Default Settings 28
I
IncreaseVolDelay 54
INOP Severity Factory Default Settings 56
INOP Severity Settings Configuration
Implications
56
Interfaces 97
Interval 42
IP Address 102
IP Config 101
IP OB Server 83
iTtymp 44
iTtymp Configuration Implications 43
iTtymp Factory Default Settings 43
IUP Configuration Implications 27
IUP Factory Default Settings 27
K
Keep Blinking 55
Keyboard 97
L
Label 42, 44
LAN Data Export 87
Last Name, First Name, Middle Name 90
Last Name, First Name, Middle Name,
Encounter Id, Date of Birth
93
Lifetime ID 93
Lifetime ID Lbl 91
Lifetime ID, Encounter ID 91
Line Frequency 85
M
Max. Decelerat. 72
Measurement 31
Measurement Settings 10, 23
Measurement Time 41, 61
MECG Alarms 28
Min. Accelerat. 72
Mode 40
Monitor Settings 10, 47
Msmnt 42
N
NBP 40
NBP Alarm Suppr. 33
NBP Configuration Implications 38
NBP Factory Default Settings 37
NBP Sys/Dia only 61
No Pulse 57
Not Applicable 16
Notes Recording 65
Notification 69
NST Analysis 71
NST Autostart 66
NST Autostop 66
NST Report Configuration Implications 71
NST Report Factory Default Settings 71
NST Report Recording Use Models 74
NST Status Display Only 79
NST Timer Configuration Implications 69
NST Timer Factory Default Settings 69
O
OBR Configuration Implications 100
OBR Factory Default Settings 100
Operation Mode 16
P
Paper Advance 63
Paper Save Mode 66
Pause Al. 5 min, Pause Al. 10 min 50
Power Loss Sound 86
Power Off 87, 89
Prompt Volume 58
Pulse (SpO2) Configuration
Implications
34
Pulse (SpO2) Factory Default Settings 34
Pulse (Toco) Configuration
Implications
31
Pulse (Toco) Factory Default Settings 31
Pulse Alarms 34
Q
QRS Low 58
QRS Type 58, 86
QRS Volume 28, 35, 58
Quick Admit Configuration
Implications
93
Quick Admit Factory Default Settings 93
Quick Admit Settings 93
QuickAdmitDischg 93
R
Record ECG Wave 64
Record on Trace 33
Recorder Speed 64
Recording NST Report and Stored Trace
On Demand
80
Recording NST Report Automatically and
Stored Trace Automatically if Criteria
Not Met
82
Recording NST Report Only and
Automatically
78
Recording of Stored Data Traces 74
Recording Trace and NST Report
Automatically
75
Recording Trace Automatically and NST
Report Manually After Recorder
Stop
76
Recording Trace Continuously and NST
Report Manually
77
Red Alarm Volume, Yell.AlarmVolume,
INOP Volume
53
Red and Yellow Measurement Alarm
Latching Behavior
52
RedAlarmInterval, Yel.Al. Interval 53
Reference 41
To Next Page
Loading...
