7 Global Settings
87
LAN Data Export
The setting LAN Data Export lets you configure how much of the MIB data export information is sent
via the LAN interface:
•
All: full functionality, all available MIB data export information is sent.
•
Anonymous: restricted functionality, no patient demographics information is included.
•
Off: MIB data export is disabled for the LAN interface.
Configuring Auto Free Settings
Global Settings: Main Setup > Global Settings > Auto Free
Auto Free Factory Default Settings
Auto Free Configuration Implications
The Auto Free settings determine when the last patient monitored is automatically discharged from the
monitor after the monitor has been switched off or after
Standby Mode.
Power Off
The Power Off setting defines the period after the switch off in which such an automatic discharge
occurs. Choices are:
•
1 min
• 10 min
• 30 min
• 1 h
• 3 h
• 8 h
• Never
When the monitor is switched on again, it is ready to monitor a new patient.
Standby
The Standby setting defines the period after entering the Standby Mode in which such an automatic
discharge occurs. Choices are:
•
1 min
• 10 min
• 30 min
• 1 h
• 3 h
Setting Item Mode Factory Default Choice/Range
Power Off C Never 1 min, 10 min, 30 min, 1 h, 3 h, 8 h, Never
Standby C Never 1 min, 10 min, 30 min, 1 h, 3 h, 8 h, Never
To Next Page
Loading...
