Philips FM20 - Recording Trace Continuously and NST Report Manually

6 Monitor Settings
77
Recording Trace Continuously and NST Report Manually
To configure this use model, configure the following settings:
• The real-time trace recording begins upon starting the NST trace interpretation.
• When the NST trace interpretation is finished or stopped, the recorder continues real-time
recording.
•The
NST Report is printed if you stop the recorder with the Record Report SmartKey.
Setting Item Mode
Main Setup > NST Report > Setup > Setup NST Report > Report Recording > Manual C, M
Main Setup > NST Report > Setup > Setup NST Report > Auto Trace Rec > No C
Main Setup > Fetal Recorder > NST Autostart > On C
Main Setup > Fetal Recorder > NST Autostop > Off C