6 Monitor Settings
76
Recording Trace Automatically and NST Report Manually After Recorder Stop
To configure this use model, configure the following settings:
• The real-time trace recording begins upon starting the NST trace interpretation.
• When the NST trace interpretation is finished or stopped, the recorder continues real-time
recording.
•The
NST Report is printed if you stop the recorder with the Start/Stop SmartKey.
Setting Item Mode
Main Setup > NST Report > Setup > Setup NST Report > Report Recording > After Recorder
Stop
C, M
Main Setup > NST Report > Setup > Setup NST Report > Auto Trace Rec > No C
Main Setup > Fetal Recorder > NST Autostart > On C
Main Setup > Fetal Recorder > NST Autostop > Off C
To Next Page
Loading...
