Philips FM20 - Page 6

1 Release-Specific Information
6
Main Setup > Alarms > Alarm
Settings > Keep Blinking
new setting “Keep Blinking” on page 55
Main Setup > Alarms > Alarm
Settings > Relay1 Sensitiv., Relay2
Sensitiv., Relay3 Sensitiv.
new setting “Relay1 Sensitiv., Relay2 Sensitiv.,
Relay3 Sensitiv.” on page 55
Main Setup > Alarms > Alarm
Settings > CyanRelayLatency,
Yel.RelayLatency
new setting “CyanRelayLatency,
Yel.RelayLatency” on page 55
Main Setup > Alarms > INOP
Severity
new settings “Configuring INOP Severity” on
page 56
Main Setup > User Interface > Aged
Numerics
new setting “Aged Numerics” on page 62
Main Setup > Patient Demogr. renaming of the former operation
Admit/Dischrg
n/a
Main Setup > NST Report > Short
Term Var.
change of the factory default to Off “Short Term Var.” on page 72
Main Setup > Global Settings >
Auto Free
new settings “Configuring Auto Free Settings” on
page 87
Main Setup > Global Settings >
Demograph.Fields > Last name;
First Name
new setting choices “Last Name, First Name, Middle
Name” on page 90
Main Setup > Global Settings >
Demograph.Fields > Alias
new setting “Alias” on page 90
Main Setup > Global Settings >
Demograph.Fields > Date of Birth
new setting choices “Date of Birth” on page 91
Main Setup > Global Settings >
Demograph.Fields > Lifetime Id Lbl
new setting choices “Lifetime ID Lbl” on page 91
Main Setup > Global Settings >
Quick Admit
new settings “Quick Admit Settings” on page 93
Main Setup > Hardware > IP Config new setting choice “IP Config” on page 101
Main Setup > Hardware > SRR new settings “Configuring SRR Settings” on
page 98
Main Setup > Hardware > OBR new settings “Configuring OBR (OB Radio)
Settings” on page 100
Path Description Change, see...