Phoenix Contact AXC F 1050 User Manual

Web-based management (WBM)
107709_en_00 PHOENIX CONTACT 119 / 140
9.3.3.4 “WebVisu” area
This area contains a link that you can use to open the PC Worx Engineer HMI application
for the controller.
• Click the “WebVisu” link.
Figure 9-14 “WebVisu” link
If there is a PC Worx Engineer HMI application on the controller, the visualization project is
opened in the browser.
Proceed as follows to switch back from the visualization project to the WBM within the
browser:
• In the address field of the browser, enter the URL
“http://IP address of the controller/wbm” (example: http://192.168.0.2/wbm).
The WBM opens.

Phoenix Contact AXC F 1050 Specifications

General

Brand	Phoenix Contact
Model	AXC F 1050
Category	Controller
Language	English