Phoenix Contact AXC F 1050 User Manual

Performing updates
107709_en_00 PHOENIX CONTACT 131 / 140
When the update is complete, you must remove the SD card and restart the controller:
• Disconnect the power to the controller.
• Remove the SD card.
Operation with an SD card If the SD card used for updating is the same one you had previously been using as main or
additional memory:
• Delete the “systemupdate” directory from the SD card.
• Insert the SD card back into the controller.
• Switch on the supply voltage.
If you used a different SD card for updating:
• Insert the SD card that had previously been used as main or additional memory back
into the controller.
• Switch on the supply voltage.
Operation without an SD
card
If you had been using the controller without an SD card before updating:
• Switch on the supply voltage.

Phoenix Contact AXC F 1050 Specifications

General

Brand	Phoenix Contact
Model	AXC F 1050
Category	Controller
Language	English