User’s Manual of GS-5220 LCD Series
351
• TCP/UDP Source
Filter
Specify the TCP/UDP source filter for this ACE.
â– Any: No TCP/UDP source filter is specified (TCP/UDP source filter
status is "don't-care").
â– Specific: If you want to filter a specific TCP/UDP source filter
with this ACE, you can enter a specific TCP/UDP source value. A
field for entering a TCP/UDP source value appears.
â– Range: If you want to filter a specific TCP/UDP source range filter
with this ACE, you can enter a specific TCP/UDP source range
value. A field for entering a TCP/UDP source value appears.
• TCP/UDP Source No.
When "Specific" is selected for the TCP/UDP source filter, you can enter
a specific TCP/UDP source value. The allowed range is 0 to 65535. A
frame that hits this ACE matches this TCP/UDP source value.
• TCP/UDP Source
Range
When "Range" is selected for the TCP/UDP source filter, you can enter
a specific TCP/UDP source range value. The allowed range is 0 to
65535. A frame that hits this ACE matches this TCP/UDP source value.
• TCP/UDP Destination
Filter
Specify the TCP/UDP destination filter for this ACE.
â– Any: No TCP/UDP destination filter is specified (TCP/UDP
destination filter status is "don't-care").
â– Specific: If you want to filter a specific TCP/UDP destination
filter with this ACE, you can enter a specific TCP/UDP destination
value. A field for entering a TCP/UDP destination value appears.
â– Range: If you want to filter a specific range TCP/UDP destination
filter with this ACE, you can enter a specific TCP/UDP destination
range value. A field for entering a TCP/UDP destination value
appears.
To Next Page
Loading...
Need help?
General