User’s Manual of GS-5220 LCD Series
493
4.16.1 Power over Ethernet Powered Device
3~5 watts
Voice over IP phones
Enterprises can install PoE VoIP phones, ATA sand other
Ethernet/non-Ethernet end-devices in the center where UPS is
installed for un-interruptible power system and power control
system.
6~12 watts
Wireless LAN Access Points
Access points can be installed at museums, sightseeing sites,
airports, hotels, campuses, factories, warehouses, etc.
10~12 watts
IP Surveillance
IP cameras can be installed at enterprises, museums, campuses,
hospitals, banks, etc. without worrying about electrical outlets.
3~12 watts
PoE Splitter
PoE Splitter split the PoE 56V DC over the Ethernet cable into
5/12V DC power output. It frees the device deployment from
restrictions due to power outlet locations, which eliminate the
costs for additional AC wiring and reduces the installation time.
3~25 watts
High Power PoE Splitter
High PoE Splitter split the PoE 56V DC over the Ethernet cable into
24/12V DC power output. It frees the device deployment from
restrictions due to power outlet locations, which eliminate the
costs for additional AC wiring and reduces the installation time.
To Next Page
Loading...
