3.36
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
© Copyright 2014 Polaris Industries Inc.
4. Measure the diameter of the camshaft journals using
a micrometer. Compare to specification.
NOTE: Replace camshafts if damaged or if any
part is worn past the service limit.
Camshaft Journal O.D.:
0.9036 - 0.9055" (22.954 - 22.999 mm)
0.9033" (22.944 mm)
5. Temporarily install the camshaft carriers to measure
the camshaft bore. Torque bolts in sequence to
specification. Replace cylinder head if worn.
Camshaft Carrier Bolts:
89 in-lbs (10 Nm)
6. Measure camshaft bore and compare to
specifications.
NOTE: Replace cylinder head if camshaft journal
bores are damaged or if worn past the service
limit.
Camshaft Carrier Bore I.D.:
0.9055 - 0.9063" (23.000 - 23.021 mm)
0.9072" (23.044 mm)
7. Calculate oil clearance by subtracting camshaft
journal O. D. s from camshaft carrier bore I. D. s.
Compare to specification.
Calculated Camshaft Oil Clearance:
0.0000 - 0.0026" (0.001 - 0.067 mm)
0.0039" (0.1 mm)
ENGINE / COOLING SYSTEM
To Next Page
Loading...
Need help?
General
