Polaris RZR XP4 1000

6.10
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
© Copyright 2014 Polaris Industries Inc.
10. Torque left side mounting bolts to specification in
sequence.
11. Torque right side mounting bolts to specification
using the numbered sequence shown.
Engine / Transmission Mounting Bolts:
Step 1-2: 64 ft-lb (87 Nm)
Step 3: 5 ft-lb (7 Nm)
Step 4-7: 44 ft-lb (60 Nm)
12. Remove the clutch center distance tool.
13. Remove the spacer or support between the vehicle
frame and engine.
14. Install and properly route the gear position switch
connector
5
, speed sensor connector
6
, crankshaft
position sensor connector
7
, shift bracket and shift
bracket bolts
8
, shift cable clevis pin and washer
9
onto the transmission.
15. Torque the two shift cable bracket bolts to
specification.
Shift Cable Bracket Bolts:
17 ft-lb (23 Nm)
TRANSMISSION