8 Installing Webster Software
TS and Webster
®
Multiple PolyVision Products in Windows
To use multiple PolyVision products in Windows:
1 Launch Webster once for each PolyVision product you have
connected.
2 To identify or change the PolyVision product that is associated with an
instance of Webster, choose “Find Whiteboard” from the Edit menu in
that Webster window.
Each application is independent. You can customize the options for each
PolyVision product individually by choosing “Options” in the Edit menu of
the Webster application associated with that product. “Options” are saved
in the same order that you launched the Webster applications.
After you close the applications, the order you reopen them determines
which options are associated with a PolyVision product.
Multiple PolyVision Products on a Macintosh
To use multiple PolyVision products on a Macintosh:
1 Locate the Webster application in the Webster folder.
2 Create one copy of the application for each PolyVision product
connected to the computer.
3 Rename the applications. (For example, use Webster1, Webster2, etc.
as in the instructions below. Or rename the applications as needed to
differentiate them in a meaningful way for your circumstances.)
4 Launch Webster1.
5 Choose “Find Whiteboard” from the Edit menu. A dialog lists all the
PolyVision products connected to your computer.
6 Choose one PolyVision product to associate with this instance of
Webster.
7 Leaving Webster1 running, launch Webster2.
8 Choose “Find Whiteboard” from the Edit menu. Webster2 connects
only to the PolyVision products not already assigned to Webster1.
9 Choose one PolyVision product to associate with Webster2.
10 Continue launching Webster applications and choosing “Find
Whiteboard” until you have associated each product with an open
Webster application.
Webster_draft2.book Page 8 Friday, November 3, 2006 2:24 PM
To Next Page
Loading...