42 Working with Snapshots
TS and Webster
®
order, reorganize the snapshots. Refer to “Copying and Moving
Snapshots” on page 42.
Webster playback shortcuts appear on the command toolbar.
1 Play: Click to play back the selected snapshot, or choose “Play” from
the Playback menu.
2 Pause: Click to pause playback, or choose “Pause” from the Playback
menu. Click again to continue playback.
3 Stop: Click to stop playback, or choose “Stop” from the Playback
menu. Click Play to continue playback.
4 Loop: To repeat playback in a continuous loop, click the Loop button
or choose “Loop” in the Playback menu, then click Play. To return to
normal playback, click Loop again.
5 Play All: To playback all the snapshots in the Webster file (not just the
selected snapshots), click the Play All button or choose “Play All” in
the Playback menu, then click Play. To return to normal playback, click
Play All again.
6 Timing: Click to specify playback timing; or choose “Options” from the
Edit menu (Windows) or “Preferences” from the application menu
(Mac) and click the “Playback” tab. Refer to “Customizing Playback
Options” on page 71.
COPYING AND MOVING SNAPSHOTS
You can move or copy snapshots:
• Within the current Webster file
• Into another Webster file
• Into another application
To move one or more snapshots within an open Webster file:
• Drag the selected snapshot(s) to reposition them within the Snapshot
pane.
Webster_draft2.book Page 42 Friday, November 3, 2006 2:24 PM
To Next Page
Loading...
