Installing the TS and TSL Series Whiteboards 81
TS and Webster
®
INSTALLING THE TS AND TSL SERIES WHITEBOARDS
To install the TS (touch sensitive) and TSL (touch sensitive with Lightning
technology) whiteboard models, follow the steps in this section. If you have
one of the Walk-and-Talk whiteboard models, the installation instructions
are provided separately.
Three installation options are available for the TS and TSL series interactive
whiteboards, depending on your model.
• You can hang the TS 400, TS 410, TSL 400 or TSL 410 from a cubicle
divider using the hangers provided.
• You can mount any TS or TSL whiteboard to a mobile stand available
from your Polyvision dealer. If you use this option, follow the mounting
instructions provided with the mobile stand, then proceed to
“Connecting Your Whiteboard” on page 84.
• You can also mount any TS or TSL whiteboard to a wall using the
instructions provided here.
A wireless option is available for TS and TSL whiteboards. Instructions for
installing and operating the TS Wireless option are also provided in this
section. Refer to “Installing and Using the TS Wireless Option” on page 86.
Webster_draft2.book Page 81 Friday, November 3, 2006 2:24 PM
To Next Page
Loading...
