80 Troubleshooting, Care, and Maintenance
TS and Webster
®
• www.polyvision.com
• Do not use ballpoint pens or other pointed instruments on the surface.
• Do not use abrasive cleaners on the surface.
• To erase pen strokes made with permanent markers, write over the
marks with a dry-erase marker of the same or similar color, then erase.
• To avoid damage, use only the power supply or cord that came with
your Webster whiteboard.
• To store your whiteboard for prolonged periods, place it in a vertical
position. Do not store flat.
• Keep all shipping cartons in case you need to return your Webster
board for repair.
Caring for the Markers, Stylus and Eraser
• Cover the markers when not in use.
• Store the markers horizontally (e.g., in the whiteboard tray).
• TS and TSL models: Clean the stylus with a cloth dampened with mild
soap and water.
• Rub the eraser against a towel to remove ink residues. If excessive ink
buildup occurs, contact PolyVision for a replacement pad. Call
1.800.620.POLY (7659) in the USA, 1.678.542.3100 outside the USA,
or +32 (0)89 32 31 30 in Europe, or go to:
• www.polyvision.com
Webster_draft2.book Page 80 Friday, November 3, 2006 2:24 PM
To Next Page
Loading...
