34 Using Webster with a Projector
TS and Webster
®
USING PROJECTION MODE WITH POWERPOINT
In projection mode, you can control a Microsoft PowerPoint presentation
from the PolyVision product, with no need for a mouse or keyboard to
navigate the slides.
To use Webster in projection mode with PowerPoint:
1 If necessary, enter projection mode in Webster. (Refer to “Using
Webster in Projection Mode” on page 26.)
2 Launch PowerPoint and begin the slide presentation.
To move forward and backward through PowerPoint slides:
• TS and TSL models: Tap the Forward and Back icons on the
whiteboard icon strip.
• Walk-and-Talk models: Press the Next and Previous buttons on the
remote control.
To mark up a slide:
• Tap a pen button in the projection toolbar and begin writing.
To capture all the PolyVision product contents, which may include your
writing with dry-erase markers, the projected slide, and projection mark-
ups:
• TS and TSL models: Tap the Snapshot or Snapshot/Erase All icon on
the whiteboard icon strip.
• Walk-and-Talk models: Press the Save button on the remote control.
• Tap the Snapshot button in the projection toolbar.
To capture only the projected PowerPoint slide and projection mark-ups:
• Tap the Screen Snapshot button in the projection toolbar.
Webster_draft2.book Page 34 Friday, November 3, 2006 2:24 PM
To Next Page
Loading...
