PolyVision TS Series - Snapshots When Webster Is the Active Application; Toggling between Webster and Other Applications

30 Using Webster with a Projector
TS and Webster
®
button on the remote control (Walk-and-Talk models), or choose
“Snapshot” in the Edit menu.
To capture a snapshot that includes only the projected computer screen
and projection mark-ups:
• Tap the Screen Snapshot button in the projection toolbar. Refer to “The
Projection Toolbar” on page 27.
note:NOTE:
The projected image and writing are recorded in a Webster snapshot, not
in the original application file (e.g., PowerPoint).
For more information on using PowerPoint with Webster, see “Using
Projection Mode with PowerPoint” on page 34.
Snapshots When Webster is the Active Application
In projection mode, when Webster is the active application, you can
choose to what is included in your snapshot.
To capture a snapshot including writing (but not the projected Webster
application screen):
• Tap the Snapshot button in the projection toolbar, tap the Snapshot
icon on the whiteboard (T S models), press the Save button on the
remote control (Walk-and-Talk models), choose “Snapshot” in the Edit
menu, or tap the Snapshot icon on the annotation toolbar.
To capture a snapshot of the projected computer screen:
• Tap the Screen Snapshot button in the projection toolbar. Refer to “The
Projection Toolbar” on page 27.
TOGGLING BETWEEN WEBSTER AND OTHER APPLICATIONS
In projection mode, you can work with multiple software applications that
are all projected on the PolyVision product.
To bring the Webster application to the front:
• TS and TSL whiteboards: Tap the Show Webster icon on the
whiteboard icon strip. Tap again to send Webster to the back.
• From your Windows PC: Choose “Webster application” from the
system task bar or choose “Go To Webster” from the System Tray
Menu.
Webster_draft2.book Page 30 Friday, November 3, 2006 2:24 PM