EasyManua.ls Logo

PolyVision TS Series - Wireless Option Components

PolyVision TS Series
110 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installing the TS and TSL Series Whiteboards 87
TS and Webster
®
TS Wireless works best when the two transceivers are within 24 feet (7 m)
of one another. The TS wireless option only words with TS interactive
whiteboards.
Ceiling height and material also make a difference in performance. The
higher the ceiling, the closer together the transceivers need to be. A non-IR
reflective ceiling also reduces the range. The 24-foot (7 m) range assumes
a typical office conference room with a ceiling height of between 8 and 12
feet (2.5 and 3.5 m) and a light-colored, acoustic tile ceiling. If your ceiling is
not IR reflective, try using one of your walls. Do this by mounting one
transceiver on the side of your whiteboard and pointing the other
transceiver toward the wall on that side of the whiteboard.
What Comes with the Wireless Option
1 1 whiteboard transceiver (with long cord)
2 1 computer transceiver (with short cord)
3 2 power adapters with cords
4 1 power sharing cable
5 1 strip of double sided, foam mounting tape
Webster_draft2.book Page 87 Friday, November 3, 2006 2:24 PM

Table of Contents

Related product manuals