PolyVision TS Series - Creating a File; Saving a File; Opening a File; Closing a File

40 Working with Snapshots
TS and Webster
®
Creating a File
To create a new Webster file:
• Choose “New” from the File menu. If the existing file contains unsaved
changes, you are prompted to save the file.
When you open a new file, Webster options enable you to choose whether
or not the contents of the current board pane remain visible in the new file.
(Refer to “Customizing General Options” on page 65.)
Saving a File
Activity is recorded as long as the system is on and the Webster software is
running. Snapshots that you capture are not saved to disk until you save
the currently open file.
To save the file:
1 Choose “Save As” from the File menu.
2 Enter a name for the file.
3 Browse to the file destination.
4 Click “OK.”
Opening a File
To open an existing Webster file:
1 Choose “Open” from the File menu.
2 Select the file in the standard dialog that appears.
In Windows, you can also choose a recently opened file by choosing
“Recent Files” the File menu.
When you open a file, you are prompted to save if the current file includes
unsaved data.
Closing a File
To close a Webster file:
• Choose “Close” from the File menu.
If the file contains unsaved data, you are prompted to save it.
Webster_draft2.book Page 40 Friday, November 3, 2006 2:24 PM