Installing the TS and TSL Series Whiteboards 85
TS and Webster
®
2 Plug the other end of the USB cable to the USB port on the
whiteboard.
Connections for TS 400, 600 or 800 Models
To connect the whiteboard to your computer:
1 Plug the AC power cord into the power connector on the bottom of
the whiteboard, next to the serial port.
2 Twist the cord behind the cable bracket.
AC Power Cord
9-Pin Serial Cable
Cable Bracket
Webster_draft2.book Page 85 Friday, November 3, 2006 2:24 PM
To Next Page
Loading...
