12 Webster Basics
TS and Webster
®
provided with the product. To erase everything and start fresh, press
the Erase All button on the remote control.
About Printing
You can print an image of what you see displayed at any time using a
printer that is connected to the computer.
To print:
• TS or TSL whiteboards: Tap the Print icon on the whiteboard icon strip
or in the projection toolbar.
• Walk-and-Talk models: Press Print on the remote control.
The PolyVision product sends the image to the printer using the current
“Print Setup” settings in the Webster software.
About Capturing a Snapshot
The Webster software records all the activity on the PolyVision product.
To capture a snapshot image that you can save or use on the computer:
• TS or TSL whiteboards: Tap a Snapshot icon on the whiteboard.
• Walk-and-Talk models: Press the Save button on the remote control.
The Webster software captures an image and adds it to the Webster file
that is open. You can continue writing, or erase and continue.
Webster_draft2.book Page 12 Friday, November 3, 2006 2:24 PM
To Next Page
Loading...
