Safety Regulations
III
Power Requirements
$
100 - 110 V (-10/+6%) AC, 12 A (average)
$
100 - 110 V (-10/+6%) AC, 12 A (average)
$
110 - 120 V (-10/+6%) AC, 12 A (average)
$
220 - 240 V (-10/+6%) AC, 6 A (average)
$
50 - 60 Hz
Note:
To avoid an overload of the electric circuit support (particularly for 100 to
110 or 110 to 120V) connect the power-supply plug of the printer into a
separate protected power wall socket.
Power Consumption
$
Operating power < 1.200 Watt average; (<1.650 W peak during
Warming Up)
$
Operating current < 100 Watt
$
Power save
45 W
Notes:
Slots and openings in the printer's housing are provided for
ventilation. Always ensure that these openings are not obstructed.
Also ensure that the cables of the printer do not interfere with the
output paper path.
During the printing process ozone will be produced. Take care that
the printer is standing in a room with good ventilation. The limt of
ozone concentration should be 0,1 ppm (0,2 mg/m ). Note that the
3
specific gravity of ozone is higher than that of air.
The intelligent Paper Stacker iPS 4050E can only be used in conjunction with
the printer PP 4050 or PP 4060.
Caution:
Connector not located in limited Power Source! Only for connecting
Paper Stacker (iPS 4050E). Refere to User´s Manual.
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
To Next Page
Loading...