Pulsar ULTRA TWIN User Manual

Page 68
For More Options Hit Enter
Parameter
Set Value
Description
P213 / P214
Relay 1
ON/OFF
setpoints
depends on
application
Set required Alarm Setpoints.
P223 / P224
Relay 2
ON/OFF
setpoints
depends on
application
Set required Alarm Setpoints.
P233 / P234
Relay 3
ON/OFF
setpoints
depends on
application
Set required Alarm Setpoints.
P243 / P244
Relay 4
ON/OFF
setpoints
depends on
application
Set required Alarm Setpoints.
P253 / P254
Relay 5
ON/OFF
setpoints
depends on
application
Set required Alarm Setpoints.
P263 / P264
Relay 6
ON/OFF
setpoints
depends on
application
Set required Alarm Setpoints.
P708 Flow
Decimal
2
Set the number of decimal points required
in the flow rate display
P709 Flow
Cut Off
5.00%
Enter as a percentage of maximum flow,
the minimum flow rate to be added to the
totaliser.
P830
mA Out
Range
2= 4 to 20
mA
What the mA output uses for the range.
0= Off, 1= 0 to 20 mA, 2= 4 to 20 mA,
3= 20 to 0 mA, 4= 20 to 4 mA.
P870
Fill Damping
32.8084 feet
Rate of maximum fill rate (set above the
actual fill rate of the vessel).
P871
Empty
Damping
32.8084 feet
Rate of maximum empty rate (set above
the actual empty rate of the vessel).

Pulsar ULTRA TWIN Specifications

General

Brand	Pulsar
Model	ULTRA TWIN
Category	Measuring Instruments
Language	English